Hobie Forums http://www.hobie.com/forums/ |
|
Ram mounts for tandem island http://www.hobie.com/forums/viewtopic.php?f=100&t=45557 |
Page 1 of 1 |
Author: | Chopcat [ Mon Nov 05, 2012 7:22 am ] |
Post subject: | Ram mounts for tandem island |
Can anyone advise the diameter of the outrigger tubes and/or the best ram part numbers for mounting ram balls onto the tubes please. only asking so I am ready when our new TI turns up and can film the first splash cheers CC |
Author: | tonystott [ Mon Nov 05, 2012 9:01 am ] |
Post subject: | Re: Ram mounts for tandem island |
I believe that far and away the best aka mounts are the Railblaza ones, which are designed specifically for Islands. http://www.railblaza.com/products/view/ ... 41/138/59/ and camera boom http://www.railblaza.com/products/view/ ... ts/181/59/ |
Author: | Chopcat [ Mon Nov 05, 2012 2:01 pm ] |
Post subject: | Re: Ram mounts for tandem island |
tonystott wrote: I believe that far and away the best aka mounts are the Railblaza ones, which are designed specifically for Islands. http://www.railblaza.com/products/view/ ... 41/138/59/ and camera boom http://www.railblaza.com/products/view/ ... ts/181/59/ Cheers tony. Have just ordered a few. Now I need to find a way to adapt the scotty parts I have to fit the star ports. Cheers |
Author: | serbi [ Tue Nov 06, 2012 12:15 am ] |
Post subject: | Re: Ram mounts for tandem island |
Copy that. Railblazza mounts totally rock on the island. I exchanged all my ram mounts to Railblazza mounts and they are far more stable than the ram mounts. Peace Serbi |
Author: | Yakgear [ Sun Nov 11, 2012 4:34 pm ] |
Post subject: | Re: Ram mounts for tandem island |
This is Bill Bragman with Yak-Gear We are the North American Distributor for Railblaza Paddle Sports A couple of questions. Which accessory would you prefer. A Railblaza adaptor allowing you to fit any Railblaza product in a Scotty Mount? A Railblaza adaptor allowing you to fit any Scotty product in a Railblaza Mount? A Railblaza adaptor allowing you to fit any Railblaza product in a Ram Mount? A Railblaza adaptor allowing you to fit any Ram product in a Railblaza Mount? Your thoughts are greatly appreciated... |
Author: | NOHUHU [ Mon Nov 12, 2012 4:13 pm ] |
Post subject: | Re: Ram mounts for tandem island |
Hi Bill. Having tried them all I'd opt for: A Railblaza adaptor allowing you to fit any Scotty product in a Railblaza Mount The RAM thing would be very cheap and easy to do, through the adaptors, but I'm not tempted to put the RAM rodholders back on my AI, even though I could. Someone might want to do this for light electronics or camera gear though. |
Author: | Chopcat [ Wed Nov 21, 2012 3:50 pm ] |
Post subject: | Re: Ram mounts for tandem island |
Here is my solution. Using two trackmount starports you can fix a geartrac GT90 using railblaza starport adapters screwed into the track at both ends. You can then fit all the yakattack products, scotty mounts etc. Job done. |
Author: | Chopcat [ Sat Feb 09, 2013 7:41 am ] |
Post subject: | Re: Ram mounts for tandem island |
this combines answers to two problems that I had. mounting multiple ram mounts on the aka tube on the center section.. adjustable yakattack rail mount for the Ti hopefully a picture tells 1000 words. |
Author: | dimes [ Sun Jun 11, 2017 3:19 pm ] |
Post subject: | Re: Ram mounts for tandem island |
Anybody know where to get the piece that's between the starport adapters and the geartrac. i like this idea but can't find it and i think it adds some stability instead of just cranking down the startport adapter. Thanks. |
Author: | NickW [ Sun Jun 11, 2017 6:27 pm ] |
Post subject: | Re: Ram mounts for tandem island |
Chopcat wrote: this combines answers to two problems that I had. mounting multiple ram mounts on the aka tube on the center section.. adjustable yakattack rail mount for the Ti hopefully a picture tells 1000 words. Could you please show that attached to the boat, many thanks. |
Author: | Scurvy [ Sat Nov 09, 2019 10:59 am ] |
Post subject: | Re: Ram mounts for tandem island |
Yakgear wrote: This is Bill Bragman with Yak-Gear We are the North American Distributor for Railblaza Paddle Sports A couple of questions. Which accessory would you prefer. A Railblaza adaptor allowing you to fit any Railblaza product in a Scotty Mount? A Railblaza adaptor allowing you to fit any Scotty product in a Railblaza Mount? A Railblaza adaptor allowing you to fit any Railblaza product in a Ram Mount? A Railblaza adaptor allowing you to fit any Ram product in a Railblaza Mount? Your thoughts are greatly appreciated... Scotty to RailBlaza! Fishing the NorCal coast. NCKA.org |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |