Hobie Forums http://www.hobie.com/forums/ |
|
Post Your Trailer Setup Here ..... http://www.hobie.com/forums/viewtopic.php?f=11&t=41773 |
Page 1 of 2 |
Author: | Kramster [ Sun Mar 25, 2012 5:58 am ] |
Post subject: | Post Your Trailer Setup Here ..... |
My 2 Sports came with this trailer. I put new boards and carpet on the "Jets Ski" holder things and moved the spare tire so my longer kayaks can fit in the middle and added the temp top cross bars for my other kayaks. I am going to a metal guy to get a center channel for my MC (KLR 650) and some sort of set up so as to be able to take the top cross bars off and on easier and prolly a couple different ones at different heights and configurations for what ever I get into next.. |
Author: | kingdaddy [ Sun Mar 25, 2012 7:35 am ] |
Post subject: | Re: MY Lil Trailer Set Up |
Very Nice!! Everybody should start a Trailer post here, I was about to post mine that I built over that past few weekends but it would be better if they were all in one place. |
Author: | kingdaddy [ Mon Mar 26, 2012 4:44 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
$300 Harbor Freight Trailer (12" wheels) and some Malone car top mounts and a toung extension. I added a cheep Rubbermaid box to the front to carry the Mirage Drives and PDF in so I wont forget them. Everything redy to go, so all I do it hand hitch it up and go. |
Author: | Mike L [ Wed Mar 28, 2012 10:00 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
I bought a used Carni trailer that was used for two outbacks.On the Adventure side I put a treated 2x4 covered with indoor/outdoor carpet to cover the metal bar.On the Oasis side I used a 1 1/2"x6' sch 40 pvc conduit covered with 1 1/2"x6' polyethylene pipe wrap insulation. I covered that with indoor/outdoor carpet. Loading the Oasis is a piece of cake now. I still put the Oasis on top of the SUV when pulling my travel trailer. The pvc carpet combo has enough flex to conform to the bottom of the Oasis to support the hull. 2011 Oasis with sail 2012 Adventure with sail |
Author: | Ranger908 [ Thu Mar 29, 2012 5:46 am ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Author: | Scott [ Thu Mar 29, 2012 6:41 am ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Yeah and I am supposed to go fishing this Friday... |
Author: | HamptonT [ Fri Mar 30, 2012 9:14 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
How dO you post a picture? |
Author: | KayakingBob [ Fri Mar 30, 2012 9:23 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
HamptonT wrote: How dO you post a picture? Try this: http://www.hobiecat.com/forums/viewtopic.php?f=21&t=12574 |
Author: | HamptonT [ Sat Mar 31, 2012 9:39 am ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Author: | kingdaddy [ Sat Mar 31, 2012 2:13 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Now there is someone who likes to peddle!! |
Author: | Kramster [ Sat Mar 31, 2012 2:33 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Cool stuff on here |
Author: | adrianglock [ Fri Jun 15, 2012 7:09 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Nice done these trailers seems to fit on all kind of pickup trucks without further modification to make it work. |
Author: | wjpelka [ Sat Jun 16, 2012 5:59 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
This is my 3 place trailer. Started as a single Personal Water Craft trailer. I added 2 pairs of Yakima Outdoorsman with Hully Rollers and Mako Aero Shark kayak holders. The 2 outbacks that I have will go up top and I can put a 14' Pro Angler on the bottom, when I get one. The upper rack assembly can be pulled off quickly and used on my GMC 4x4 if I am towing a 4 wheeler or another trailer. |
Author: | rubone47 [ Sun Jun 17, 2012 12:56 pm ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
[url][URL=http://imageshack.us/photo/my-images/23/dsc04453copycopy.jpg/][/url] [/url] |
Author: | SHRED56 [ Thu Jun 21, 2012 5:44 am ] |
Post subject: | Re: Post Your Trailer Setup Here ..... |
Page 1 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |