Hobie Forums http://www.hobie.com/forums/ |
|
Replacement MirageDrive V1 Part http://www.hobie.com/forums/viewtopic.php?f=11&t=46714 |
Page 1 of 1 |
Author: | PawleysDude [ Mon Mar 04, 2013 8:42 am ] |
Post subject: | Replacement MirageDrive V1 Part |
I've got a Hobie Outback purchased new in 2006. I recently lost one of the plastic pedal crank caps that close off the pedal end of the MirageDrive crank assembly shaft. Per the latest parts guide, I ordered part # 81222101 to replace it, but the part does not fit and looks very different from the current cap remaining on the other shaft. Here's a photo, comparing the two caps. If anyone has the correct part #, I'd appreciate your help. Thanks. |
Author: | Roadrunner [ Mon Mar 04, 2013 11:06 pm ] |
Post subject: | Re: Replacement MirageDrive V1 Part |
These caps have evolved over the years. The cap is now screwed down (thus the hole in the top); the notch is for a small pedal bungee. They are probably the same part #. Ask your dealer to call Hobie Parts and inquire if any of the older versions are still available. |
Author: | mmiller [ Tue Mar 05, 2013 9:07 am ] |
Post subject: | Re: Replacement MirageDrive V1 Part |
Older caps are not available. Adapt or glue the new version in its place. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |