Hobie Cat Forums

It is currently Sat Sep 20, 2014 7:59 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Sun Dec 03, 2006 6:23 am 
Offline
Site Rank - Captain

Joined: Sat Jun 24, 2006 9:32 pm
Posts: 142
I looked but did not see this incident posted on the Hobie site. Sorry if this is a re-post.

Serious incident reported that should stimulate discussion re safety measures:

http://www.norcalkayakanglers.com/bb/in ... pic=5985.0

Incident and safety measures discussed:

http://topkayaker.net/cgi-bin/TopYak/ul ... p=1#000011

Particularly taken with idea always use floatation bags plus this from Prowler Les on the TopKayaker site:

“What is needed is some kind of screw hatch slightly larger than the diameter of the bilge pump with a rubber seal that the pump is pushed through so that the rubbers seals around the outside of the pump. This way the water can be pumped out without more water getting in.â€


Top
 Profile  
 
 Post subject:
PostPosted: Sun Dec 03, 2006 7:30 am 
Offline
Site Rank - Captain

Joined: Sun Oct 22, 2006 7:23 pm
Posts: 34
Thanks for posting that -- we should all think about the unthinkable.

Come to think of it, I should fill my Revo hull with water and see how difficult it is to paddle/peddle. I have six pool noodles in the hull "just in case" but have no way of knowing, short of experimenting, how well they would help.

Jon


Top
 Profile  
 
 Post subject:
PostPosted: Fri Dec 08, 2006 5:02 pm 
Offline
Hobie Team Member

Joined: Wed Dec 07, 2005 11:04 pm
Posts: 615
Location: Hawaii, Big Island
The pump hatch idea has been posted before. CRS on where; possibly the same guy.

A "plug" should be easy enough to built into the current hatch. Possibly just a large (believe on order 1.5-2 inch diameter) plastic screw device. The hatch seems thick enough to acomodate the few threads needs to keep the "plug" in place.

A rubber seal may not even be required. Most pumps I see (the one I have is so equipted) have a soft float device for the pump itself. It slides so could be pushed down against the hatch after the pump is inserted.

In the meantime your shirt might do the job on a temporary basis as long as the top of the center hatch is above water. Wrapped around the pump stem it should shed most incoming splashes.

I have a pice of rubber carpet flooring approx 12'in diameter with a hole cut out for the pump to cover up the center hatch hole if I ever have to pump. Knock on wood I won't.

_________________
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group