Revolution front hatch gasket coming loose

I have a 2008 revolution. The gasket of the front hatch is coming loose. On my kayak there is a hard black plastic cover for the lip of the kayak. Then there is a soft foam type gasket that I think has been glued to the black plastic. The foam is coming loose from the black plastic. What is a good adhesive to reglue them? Is the foam piece glued to the lid or the black plastic?

_________________
Duncan

Super glue. New versions of the seal are molded as one piece.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

We had a couple of those old Revo's with the glued on rubber tubing, we just used super glue to glue the tubing back down when it came loose.
If you go to some of the mail order dealers like Austin Kayak (ACK, and others, or you can order from your local dealer). You can get the newer one piece molded seals (way worth it). Super easy just pull the old off and replace with the new, takes all of two minutes.
Definately worth doing IMO.
Bob

Thanks, I used the super glue and it's as good as new.

_________________
Duncan

Yea that old design (super glue and tubing) was really cheezy, (I'm a product designer (day job))....but you can't knock it because it actually worked really well for many years.
Bob