Hobie Forums http://www.hobie.com/forums/ |
|
Hobie T2 forestay and shroud wire dimensions http://www.hobie.com/forums/viewtopic.php?f=127&t=52068 |
Page 1 of 1 |
Author: | carlmatt [ Mon Jul 07, 2014 6:02 am ] |
Post subject: | Hobie T2 forestay and shroud wire dimensions |
This is my first post on this forum so I'd like to start off by saying hey everybody! I recently bought a Hobie T2 in Europe and it was delivered to me last week. However, the wire bag was missing so I haven't been able to sail it yet. It seems that I won't be receiving the missing parts until next week (a lot of people seem to be on vacation already, including me, so everything is moving quite slowly). I am therefore wondering if someone could provide me with the dimensions of the forestay, shroud wires and bridles of the T2, so that I might be able to at least try it out before the end of my vacation. There's a hardware store pretty close to my summer place so I might be able to come up with a temporary solution until I get the wire bag from France. |
Author: | JJ [ Tue Jul 08, 2014 7:59 pm ] |
Post subject: | Re: Hobie T2 forestay and shroud wire dimensions |
Seems like something your dealer should be doing, since they have easy access to that kind of info. There are wire guides out like this one http://www.hcana.hobieclass.com/site/ho ... engths.htm but the T2 is apparently to new to be on a list like that... |
Author: | carlmatt [ Wed Jul 09, 2014 12:13 am ] |
Post subject: | Re: Hobie T2 forestay and shroud wire dimensions |
JJ wrote: Seems like something your dealer should be doing, since they have easy access to that kind of info. I completely agree, but I haven't been able to get a hold of my dealer since last Friday and back then I was under the impression that I would receive the wires quickly. Maybe I will have to contact Hobie Cat Europe directly... EDIT: I finally got a hold of my dealer and I will (hopefully) receive the wires before the weekend. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |