| Hobie Forums http://www.hobie.com/forums/ |
|
| Bent Mast replacement with H16 Mast http://www.hobie.com/forums/viewtopic.php?f=13&t=2420 |
Page 1 of 1 |
| Author: | Jcraig [ Thu Sep 15, 2005 2:07 pm ] |
| Post subject: | Bent Mast replacement with H16 Mast |
I have a friend that has an 18 with a bent mast, there is about a 3" draft in the lower 5 to 6' of the mast. Can the mast be bent back straight? He also has an old H16 mast with no comptip installed. Is the mast extrusion the same for the 16 and 18? If so can he just cut the mast and install the H18 comptip and reinstall the 18 riging, ie. diamond wires, boom connection, shroud anchor plate and mast step? They appear to be the same. Jason |
|
| Author: | Hobie Nick [ Fri Sep 16, 2005 5:39 am ] |
| Post subject: | |
Don't bend the mast back straight. It will probably just crack and break off. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|