| Hobie Forums http://www.hobie.com/forums/ |
|
| Hull repair from the inside out http://www.hobie.com/forums/viewtopic.php?f=13&t=3556 |
Page 1 of 1 |
| Author: | Jcraig [ Tue May 09, 2006 2:45 pm ] |
| Post subject: | Hull repair from the inside out |
Are there any drawbacks (structural integrity issues) in repairing delamination from the inside of the hull i.e. drilling the epoxy injection holes from inside the hull vs. the topside of the hull deck? I would rather repair the delamination this way so I don’t have to mess around with the gel-coat to hide the injection holes. Thanks, Jason |
|
| Author: | MBounds [ Tue May 09, 2006 4:18 pm ] |
| Post subject: | |
How are you going to get inside the hull? Gel coat is easy to fix - although the color match is a bear on older (faded) boats, though. |
|
| Author: | Jcraig [ Tue May 09, 2006 7:04 pm ] |
| Post subject: | Inside hull repair |
From existing port holes. I dont have any problem with access. Thanks, |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|