Hobie Cat Forums

It is currently Mon Sep 15, 2014 11:04 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Mon Jan 23, 2012 10:53 am 
Offline
Site Rank - Admiral

Joined: Tue Jul 19, 2011 7:15 am
Posts: 227
Location: Indialantic, FL
I'll be ready to re-install my tramp tracks on my restored H18 hulls in a couple of weeks, and was considering using small stainless steel bolts rather than the stock rivets and washers. I've seen rivets get loose over time, and you have to drill them out to fix the problem. Bolts seem like a better idea, easy to install, easy to replace, easy to tighten. I've already checked and there is plenty of clearance for round-head, phillips bolts on the top and lock-nuts underneath. Does anyone have some good reasons why I shouldn't use the bolts?

Thanks,

Mark

_________________
2007 Hobie Tiger


Top
 Profile  
 
PostPosted: Mon Jan 23, 2012 12:19 pm 
Offline
Site Rank - Old Salt

Joined: Mon May 09, 2005 10:25 am
Posts: 2566
Location: Jersey Shore
Use rivets. They're easier to install and the head is lower profile than a machine screw head. Also keep in mind that the fasteners that hold on the tramp tracks also hold on the jib tracks, and machine screws / bolt heads will interfere with the jib car's ability to slide in the jib tracks, so I suspect they won't work.

Yea, the rivets may loosen slighty over time, but it's not a problem and doesn't effect performance. Once you install the tramp and tighten it up, there will be very little movement of the tramp track. Just be sure you use washers on the back side of the rivets.

sm


Top
 Profile  
 
PostPosted: Tue Jan 24, 2012 2:36 pm 
Offline
Site Rank - Captain

Joined: Fri Jul 06, 2007 9:13 am
Posts: 149
Location: Shepherd, Michigan
...and pre-bend the washers to fit tightly up into the rail lip - this will go a long way toward keeping the rivets tight.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group