I am pretty sure that those mast (the 18 and 21) don't share the same profile......
| Hobie Forums http://www.hobie.com/forums/ |
|
| Need a short piece of h18 mast http://www.hobie.com/forums/viewtopic.php?f=13&t=46243 |
Page 1 of 1 |
| Author: | wannathermal1 [ Sun Jan 13, 2013 9:26 am ] |
| Post subject: | Need a short piece of h18 mast |
I am looking for a 4-5 foot (1-1.5 meter) piece of h18 mast to repair my h21se mast. Someone must have broken one over the years. I am in Germany but can easily arrange shipping from anywhere. Bob |
|
| Author: | Bill 404 [ Sun Jan 13, 2013 9:36 am ] |
| Post subject: | Re: Need a short piece of h18 mast |
I am pretty sure that those mast (the 18 and 21) don't share the same profile......
|
|
| Author: | wannathermal1 [ Sun Jan 13, 2013 9:40 am ] |
| Post subject: | Re: Need a short piece of h18 mast |
Ahh but Bill... Supposedly the 18 mast can make a sleeve that fits right inside the 21 mast (after cutting off the sail track). 
|
|
| Author: | jmecky [ Mon Jan 14, 2013 12:03 am ] |
| Post subject: | Re: Need a short piece of h18 mast |
I have an old 18 mast that is no longer in use due to corrosion around the mast rotator. I am selling the comptip (once I remove it), and have no use for the rest of the mast. I could find a clean/uncorroded piece of the extrusion and send it. |
|
| Author: | wannathermal1 [ Mon Jan 14, 2013 12:39 am ] |
| Post subject: | Re: Need a short piece of h18 mast |
That would be great! email me @ wannathermal (at) outlook (period) com |
|
| Author: | Europeguy [ Mon Jan 14, 2013 11:31 pm ] |
| Post subject: | Re: Need a short piece of h18 mast |
Bob : be warned that US Hobie parts are different from European ones ! They look very much alike but differ enough to NOT fit. Michel |
|
| Author: | wannathermal1 [ Wed Jan 16, 2013 1:09 am ] |
| Post subject: | Re: Need a short piece of h18 mast |
Europeguy My HC21SE is from 1988 and was made in the States, it has a non tapered/non-comptip mast. The older H18 mast is supposed to slide inside the 21 mast after taking off the sailtrack. Bob |
|
| Author: | Europeguy [ Wed Jan 16, 2013 3:20 pm ] |
| Post subject: | Re: Need a short piece of h18 mast |
Bob, be sure that the 18 mast is US made then. good luck Michel |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|