Hobie Forums http://www.hobie.com/forums/ |
|
Hobie 18 Bolts for Forward/Aft Port Castings http://www.hobie.com/forums/viewtopic.php?f=13&t=47977 |
Page 1 of 1 |
Author: | BobBill [ Mon Jun 10, 2013 3:16 pm ] |
Post subject: | Hobie 18 Bolts for Forward/Aft Port Castings |
Does anyone know for sure what the diameter and thread size is for these two bolts? |
Author: | jim-doty [ Tue Jun 11, 2013 2:19 pm ] |
Post subject: | Re: Hobie 18 Bolts for Forward/Aft Port Castings |
Hobie catalog says: Front = 3/8-16 x 3 3/4" Soc hd Rear = 3/8-16 x 2 1/2" Sck Hd These are the inside bolts. Here is a link to the catalog: http://static.hobiecat.com/digital_asse ... 130424.pdf |
Author: | moncasta [ Tue Jun 11, 2013 6:30 pm ] |
Post subject: | Re: Hobie 18 Bolts for Forward/Aft Port Castings |
There are at least two sizes... I know nothing beyond that, but on the underside of one of my rear crossbars, there is a note about "newer style thread depth" and two different sized bolts came out from different boats.... what year is it? |
Author: | HOBIE 911 [ Wed Jun 12, 2013 9:08 pm ] |
Post subject: | Re: Hobie 18 Bolts for Forward/Aft Port Castings |
Ditto with Doty. Ha Ha. Just happen to have my 1989 apart and the front are 3/8-16 3.75, the rear are 3/8-16 2.50. Make sure you use some sort of anti-seize anti-gauling goop when re-installing. Jim. |
Author: | BobBill [ Mon Jun 24, 2013 4:24 am ] |
Post subject: | Re: Hobie 18 Bolts for Forward/Aft Port Castings |
Thanks for the replies and information all of you. I for some reason I do not receive repy alerts. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |