Hobie Forums http://www.hobie.com/forums/ |
|
Dan D./ used Tiger Jib http://www.hobie.com/forums/viewtopic.php?f=13&t=5305 |
Page 1 of 1 |
Author: | ncmbm [ Thu Nov 09, 2006 1:26 pm ] |
Post subject: | Dan D./ used Tiger Jib |
Need a used Tiger jib for my project. Also trying to source an extrusion to make into a mast. A H20 mast would work or a F18 of any kind should do the trick. Trying to rid myself of the comptip. |
Author: | Hobie Nick [ Fri Nov 10, 2006 12:51 pm ] |
Post subject: | |
Dan Berger may still have an 18 mast (not SX) without a comptip. |
Author: | John Eaton [ Fri Nov 10, 2006 12:55 pm ] |
Post subject: | |
The H20 mast has a comp tip section and will be way shorter than stock H18 when removed. |
Author: | ncmbm [ Fri Nov 10, 2006 1:02 pm ] |
Post subject: | |
John, Didn't the 20 initially have a solid mast? Found a spar company that offers the extrusion for about $750. Don't think I'll find a used Tiger mast. |
Author: | John Eaton [ Fri Nov 10, 2006 1:17 pm ] |
Post subject: | |
Sorry, first year of 20 production was '91, after comp tip became standard on all Hobies in (not sure) '86 or '87?. |
Author: | sunjammers [ Fri Nov 10, 2006 2:13 pm ] |
Post subject: | |
demo tiger jib available thru your dealer...Hobie is giving 30% off. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |