Hobie Forums
http://www.hobie.com/forums/

Specification
http://www.hobie.com/forums/viewtopic.php?f=13&t=5559		 Page 1 of 1
Author:  Abadon [ Mon Dec 11, 2006 5:29 am ]
Post subject:  Specification
Hola, necesito conoces las medidas, Largo y diametro, de los obenques, stray proel y pata de gallo.

Abrazos y gracias
Author:  NCSUtrey [ Mon Dec 11, 2006 8:41 am ]
Post subject:  hobie 18
Mandaría un correo electrónico al Marina del Murray en California. De otro modo, quizá pregunta uno de los comerciantes de Hobie que frecuentan este sitio. Ellos probablemente no saben español aunque...

www.murrays.com

He wants to know the lengths and diameters of: shroud, forestay, and diamond wires
Author:  danneskjold [ Mon Dec 11, 2006 12:52 pm ]
Post subject: 
Thank for the breif translation. Salty Dog Marine (www.saltydogmarine.com) has a good stock of standing rigging. In their web site the cable diameter and end fitting is identified. I would measure the existing rigging for lengths if you are looking to have them made or build them yourself.

http://www.saltydogmarine.com/index.php ... 23a92cdc7b
Author:  Abadon [ Mon Dec 11, 2006 6:32 pm ]
Post subject: 
Than you very much, for the translation and data.

I live in Buenos Aires, Argentina, and i bought a 1990 HobieCat 18. I'm learning to sail this boat. I sail since my eight years old, (Optimist, Snipe, Laser, hb14) but never in Hb18.

If in the future you come to Argentina, please contact me. All are invited to sail. ([email protected] ; celular 054-011-5153-9765)


Best Regards, (sorry about my english). I hope you understand main idea.
Author:  Skipshot [ Mon Dec 11, 2006 11:42 pm ]
Post subject: 
Abadon wrote:
I'm learning to sail this boat.

Have fun learning. For many of us in this forum, we stopped sailing monohull boats after learning to sail a catamaran. Let us know if this happens to you.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/