Hobie Forums http://www.hobie.com/forums/ |
|
18 centerboard/daggerboard repair? http://www.hobie.com/forums/viewtopic.php?f=13&t=834 |
Page 1 of 1 |
Author: | jidulberger [ Mon Jun 07, 2004 6:11 pm ] |
Post subject: | 18 centerboard/daggerboard repair? |
My centerboards (daggerboards?) were a pretty chewed up on the backsides after two seasons of use. I am concerned that if I used a standard fiberglass patch, the boards might not fit in the hull slots. Please let me know if there is a good alternative or if I shoulod be concerned with that possibility. Thanks. ~Josh |
Author: | MCRose28 [ Mon Jun 21, 2004 10:07 pm ] |
Post subject: | Dagger board repair |
How badly are they damaged? I repaired mine last season using only fiberglass resin no patch screening. There were 1/2" - 3/4" pieces out of the edges. No issues with the repair after a hard season. Just make sure you don't change the shape and you should be fine. Good luck |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |