| Hobie Forums http://www.hobie.com/forums/ |
|
| harken cleat http://www.hobie.com/forums/viewtopic.php?f=14&t=1161 |
Page 1 of 1 |
| Author: | mmadge [ Sun Sep 12, 2004 4:42 pm ] |
| Post subject: | harken cleat |
One jaw, on the cleat on my harken low profile blocks is not workling.Seems like the spring is gone.Is there a fix? |
|
| Author: | mmiller [ Sun Sep 12, 2004 5:43 pm ] |
| Post subject: | Spring |
First try loosening the screw and nut that hold it to the blocks or swivel plate. Try flushing with water. There is an internal spring that may have jumped off or possibly it is just dirty. You can pop the red base plate off of the jaw set if you remove the jaws from the block. Inside you will see the two small springs that work the jaws. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|