Hobie Cat Forums

It is currently Tue Sep 02, 2014 11:46 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
PostPosted: Sun Oct 18, 2009 5:36 am 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
Have two 1980 intact Hobie Cat 16 Hulls (port and starboard) in Wilmington NC. Good shape with virtually no wear on the bottoms, Yeah I was surprised too (gel coat is still intact) White color. No soft spots or delamination. Solid hulls. $250.00/each

Dolphhin Striker ($34.00) w/ post ($22.00) and mast step($41.00)

Rear (aft) Crossbar($100.00) w/ Track($50.00) and Car ($30.00) Courner castings (port and starboard) ($75.00/each) Swivel Cam Cleat, Pad Eye with dead eye($32.00)

Side bar (port) ($70.00)

Have some other Hobie Cat 16 Parts Including older ok Sails, boom, rigging, rudders, tramp, etc just ask.....Thanks


Top
 Profile  
 
PostPosted: Mon Oct 19, 2009 6:53 am 
Offline
Site Rank - Captain

Joined: Wed Oct 14, 2009 7:50 pm
Posts: 87
I live in NC and am looking for black rudders? Do you have any i just need one, mine cracked and now i have one black and one white. Thanks

_________________
Hayden 1988 national H16


Top
 Profile  
 
PostPosted: Mon Oct 19, 2009 8:12 am 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
sorry no epo's. only have the standard nylon rudders.


Top
 Profile  
 
PostPosted: Mon Oct 19, 2009 8:40 am 
Offline
Site Rank - Captain

Joined: Wed Oct 14, 2009 7:50 pm
Posts: 87
no i don't want the epo's just the older black nylon ones.

_________________
Hayden 1988 national H16


Top
 Profile  
 
PostPosted: Mon Oct 19, 2009 9:09 am 
Offline
Site Rank - Captain

Joined: Mon Sep 21, 2009 1:03 pm
Posts: 40
Location: Madison, WI
how old is the rigging and tramp, and what kind of shape is the tramp in?

I also need a single trap if you got one?

thanks!

_________________
================
Chris

1980 H16
Emerald Blue Sails


Top
 Profile  
 
PostPosted: Mon Oct 19, 2009 7:39 pm 
Offline
Site Rank - Captain

Joined: Wed Nov 12, 2008 4:44 pm
Posts: 94
Location: Hamden, CT
Hey, I need newer standing rigging (shrouds ), a jib Hallyard, and trapeze harness, you have any of those available?

_________________
1985 Hobie 16 86068


Top
 Profile  
 
PostPosted: Tue Oct 20, 2009 3:32 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
The side stays are also old and have some cable frey but should hold if your desperate, fore stay is in good shape just let me know what you would need as there are parts attached, shackles, halyard, pully, etc.

Have several single good shape (one side each, port and starboard) trapeez lines with handles and J&H brand/style dogbones.

Thanks
Vic


Top
 Profile  
 
PostPosted: Wed Oct 21, 2009 6:57 pm 
Offline
Site Rank - Old Salt

Joined: Wed Oct 14, 2009 11:26 am
Posts: 310
where are you located?


Top
 Profile  
 
PostPosted: Wed Oct 21, 2009 7:39 pm 
Offline
Site Rank - Captain

Joined: Wed Nov 12, 2008 4:44 pm
Posts: 94
Location: Hamden, CT
Denver, i just ordered parts from the Jib Hallyard (was only 20 bucks), but i still need the metal part of the Jib hallyard, do you have that?

_________________
1985 Hobie 16 86068


Top
 Profile  
 
PostPosted: Thu Oct 22, 2009 1:48 am 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
Bassie,
I Dont know who this Keven dude is, Asking where your at!? Dont know what you mean by metal part. Do you have a Hobie catalog? If you do just give me the part numbers that you need from the back of the book. If not call me up or Em me specifics and I can get you what you need, hopefully you'll be back out ripping it up soon.

Surfsailor
Vic


Top
 Profile  
 
PostPosted: Thu Oct 22, 2009 1:54 am 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
Bassie,

I also have trapeeze cables if you want them, I think you should have them on the H-16. Nothing more fun than trapping out on that boat. Let me know

Surfsailor
Vic


Top
 Profile  
 
PostPosted: Thu Oct 22, 2009 11:46 am 
Offline
Site Rank - Old Salt

Joined: Wed Oct 14, 2009 11:26 am
Posts: 310
surfsailor wrote:
Bassie,
I Dont know who this Keven dude is, Asking where your at!? Dont know what you mean by metal part. Do you have a Hobie catalog? If you do just give me the part numbers that you need from the back of the book. If not call me up or Em me specifics and I can get you what you need, hopefully you'll be back out ripping it up soon.

Surfsailor
Vic



I didnt see you listed NC as your location....sorry?


Top
 Profile  
 
PostPosted: Thu Oct 22, 2009 12:58 pm 
Offline
Site Rank - Captain

Joined: Wed Nov 12, 2008 4:44 pm
Posts: 94
Location: Hamden, CT
well, for anyone interested then, I need the Jib Halyard Wire... I have traps and all that, but because i made that wire myself, i'm afraid it'll snap during a trip over thanksgiving.

part number: (just the wire) 20240001

_________________
1985 Hobie 16 86068


Top
 Profile  
 
PostPosted: Fri Oct 23, 2009 1:51 pm 
Offline
Site Rank - Deck Hand

Joined: Sun Oct 18, 2009 5:18 am
Posts: 6
The part number is a jib halyard block, not the wire itself. However I cant sell you the just the block or the wire without having to cut the wire off. Can only sell the entire assy. which would be more expensive than ordering a single part from Hobie. Good luck


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group