Hobie Cat Forums

It is currently Thu Dec 18, 2014 11:06 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Tue Jul 05, 2005 1:10 pm 
Offline
Site Rank - Deck Hand

Joined: Sat Jun 25, 2005 11:51 am
Posts: 2
Location: Grand Haven Michigan
Hi folks,
I am back sailing my 16 footer after a hiatus of 7 years. It is an “83” with updated rigging to 90 specs. I want to go with a Aussy Jib Halyard but I’m confused by the rigging. When I last investigated it the only system used a couple of blocks and I believe the halyard was cleated somehow to the chainplate at the bridle wires. There were two sister clips that allowed you to remove the excess line.

The systems I have seen discussed on this forum seem to cleat the jib halyard back to the mast. So I’m confused. I haven’t seen a good photo of the whole system.

It seems tat taking the halyard back to the mast still produces some of the unwanted characteristics that we are trying to get rid off. Does anybody bring the jib halyard down to the chain plate and then back to the front bar to be cleated? It would seem that that would give you the ability to unload the mast and still adjust it on the water. Being class legal isn’t a concern for me on this boat.

Any feedback would be helpful. A good diagram of the system with some dimensions would be perfect if someone is willing to do it.
Thanks in advance.
Elliott
Grand Haven, MI


Top
 Profile  
 
 Post subject:
PostPosted: Tue Jul 05, 2005 3:18 pm 
Offline
Hobie Tech / Moderator

Joined: Tue May 27, 2003 3:16 pm
Posts: 301
Location: San Diego
You may be thinking of the H18 or H17 Sport versions which you pull the sail up with the halyard going through the luff of the jib which is zippered. The H16 jib halyard system does cleat off at the mast with the purchase of the Aussie halyard system being above the head of the jib, the single line then comes down the mast and cleats near the base. The best picture I could find on short notice is on p. 37 of the Hobie parts catalog.

_________________
Greg Thomas
Hobie Factory Team


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group