| Hobie Forums http://www.hobie.com/forums/ |
|
| Installing Baby Bob on a comptip mast http://www.hobie.com/forums/viewtopic.php?f=14&t=211 |
Page 1 of 1 |
| Author: | nnelson1 [ Thu Jun 26, 2003 7:46 am ] |
| Post subject: | Installing Baby Bob on a comptip mast |
Just got my Baby Bob and the instructions on securing it to the Hobie 16 comp tip mast are a little vague. Has anyone done this? Would you be able to offer a little more info on where to drill, etc.? Maybe a picture? I'd really hate to drill my mast and discover I'd screwed something up! Thanks, Nick |
|
| Author: | mmiller [ Thu Jul 10, 2003 12:19 pm ] |
| Post subject: | Baby Bob instructions |
The Baby Bob should have come with a small packet (Part #30116) that has 4 little screws and an instruction sheet for mounting. Have your dealer get the instruction sheet or download the following file: http://www.hobiecat.com/support/pdfs/30116.pdf The baby bob is made for the Wave. The basic concept it to mount the bob on the forward pully hole. There is a different hole placement that does not match the 16. Drill another hole in the bracket and mast head that shoots between the two pulleys and place the second bolt in that hole. |
|
| Author: | nnelson1 [ Thu Jul 10, 2003 12:21 pm ] |
| Post subject: | |
Thanks! That's what I was wondering about. Nick |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|