|
Site Rank - Captain |
Joined: Mon Aug 30, 2004 12:31 pm Posts: 88 Location: Redlands, Ca
|
Ever since I upgraded my '74 to a comptip I have been unable to get my boom lower than the insertion slot on the mast, I can get it lower if I really crank the downhaul but that flattens out my sail. I cut my mast exactly to the req'd mesurements.
Since taking the comptip out is vitually impossible now, I was thinking if I took the cap and wheels off the top and shaved off an inch or so that might fix the problem... I would also have to move the halyard stop sleve down and re-rivit it.
Any other ideas? or insight?
Thanks,
Luke
|
|