I've had my rudders apart and now my boat is slow....
Rudder rake and mast rake have been set -- now just a little helm to weather.
1) ARE there port and starboard rudders?
2) What is the best way to align the rudders? My method:
Measure 15 inches down from the top of the rudder, and make a mark ( I use a grease pencil).
Draw marks, straight across from the 15 in mark on the leading edge and on the trailing edge of both rudders.
Measure rudder to rudder the leading edge seam at the mark , measure rudder to rudder the trailing edge seam at the mark and compare. Adjust at tiller if needed.
Should the rudders be towed-in with the trailing seam bigger than the leading edge?
Should the rudders be towed-out with the trailing seam less than the leading edge measurement?
Or should the meaurement be the same?