Hobie Forums http://www.hobie.com/forums/ |
|
dolly design http://www.hobie.com/forums/viewtopic.php?f=14&t=43165 |
Page 1 of 1 |
Author: | honzakr9999 [ Wed Jun 06, 2012 7:49 am ] |
Post subject: | dolly design |
Hi, could anyone advice me please on dimensions of alumunium profiles of classic dolly H16 dolly? I'd like to know height, width and a wall thickness. Thanks Honza |
Author: | mmiller [ Wed Jun 06, 2012 12:50 pm ] |
Post subject: | Re: dolly design |
Sounds like you refer to the euro style dolly. Not many of those outside Europe. We mostly use Cat Trax style wheels. |
Author: | honzakr9999 [ Fri Jun 08, 2012 7:59 am ] |
Post subject: | Re: dolly design |
Exactly. I'm going to build a dolly like this http://www.ahoycaptain.com/shop/seitech.html - Configuration 15. The CTrax type is great and simple to build but I can't find suitable wheels somewhere here. The other one needs some aluminium profiles and standard wheels you can buy in every hobby market. Just need to know what Al profiles do I need. Thanks, Honza |
Author: | J. Glanden [ Sat Jun 09, 2012 5:07 pm ] |
Post subject: | Re: dolly design |
I have built a dolly for my Wave from PVC found at your local building supply store (Home Depot, Lowe's). Cost was about $200, it would be a little more for a 16, but I believe it would work. If interested I will send you pictures and detailed plans. [email protected]. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |