Hobie Cat Forums

It is currently Tue Sep 02, 2014 8:27 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Fri Oct 19, 2012 8:59 am 
Offline
Site Rank - Captain

Joined: Mon Sep 24, 2012 3:00 pm
Posts: 70
While my first boat ever was an H12 Monocat, most of my sailing has been racing on larger yachts in the Great Lakes and Pacific off Long Beach. Trying to figure out the rigging for my H16 jib. After several years without a sailboat, and relocation across the country, I now have my "dreamboat" and am in the process of restoring it only to sail it at the local reservoir (Folsom Lake) and the occasional jaunt up to Lake Tahoe or Donner Lake .

First, boats that i have sailed either have luff clips for the jib attaching to the fore stay or the jib feeds into the fore stay kinda like the main into the mast. How does the H16 work? Is it just tensioned so the luff is taught and won't blow out? That would be tension in line with that of the fore stay.

Second, how are the sheets rigged. I am still putting together that parts as the boat is older and missing a lot... is there a block system at the clew in addition to separate sheets running to the blocks?

Third, I have all of the hardware, but no sheet. What is the best length & width for the jib sheets?

Thanks a ton for the feedback and wisdom.


Last edited by dexter on Fri Oct 19, 2012 8:19 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Oct 19, 2012 7:01 pm 
Offline
Site Rank - Admiral

Joined: Fri Apr 13, 2012 9:06 am
Posts: 278
Location: Charlotte, NC
Hi Dexter - take a look here or do a search in the forums for more (lots of similar questions answered):
viewtopic.php?f=14&t=42511&p=176682&hilit=Jib+sheet#p176682

Also, if you still have a question will be happy to assist but the rig often differs boat to boat so a photo of your setup might help. viewtopic.php?f=18&t=8574

_________________
Jonathan
'85 H16 __/) 87468 Tidal Wave
Image


Top
 Profile  
 
PostPosted: Fri Oct 19, 2012 11:51 pm 
Offline
Site Rank - Old Salt

Joined: Sat Oct 29, 2011 4:27 pm
Posts: 555
Location: Central Oregon
http://static.hobiecat.com/digital_asse ... Manual.pdf

_________________
1980 H16
1997 Wave


Top
 Profile  
 
PostPosted: Sat Oct 20, 2012 6:33 pm 
Offline
Site Rank - Captain

Joined: Sat Apr 14, 2012 1:38 am
Posts: 59
The Hobie parts book (also available online) lists the size and length for all the lines. Also, I think you can look at saltydogmarine. The sell a very reasonably priced kit with all the lines, but I think they also show the correct lengths.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group