Hobie Forums http://www.hobie.com/forums/ |
|
Can't find an old post on QR pins http://www.hobie.com/forums/viewtopic.php?f=14&t=45444 |
Page 1 of 1 |
Author: | jimrude [ Wed Oct 24, 2012 9:19 pm ] |
Post subject: | Can't find an old post on QR pins |
I may be mistaken, but I recall a post on this site that listed all of the places that QR pins/shackles could be used on a H16, with detailed specs (i.e. 3/16" x 1.25" for ...). Any help would be appreciated. |
Author: | jonh [ Thu Oct 25, 2012 8:41 am ] |
Post subject: | Re: Can't find an old post on QR pins |
Hey - not finding the exact post but consider: viewtopic.php?f=14&t=4146&hilit=quick+release+pins&start=15 viewtopic.php?f=9&t=9670&hilit=quick+release+pins viewtopic.php?f=9&t=2995&hilit=quick+release+pins They may spark ideas to narrow your search search.php |
Author: | mmiller [ Thu Oct 25, 2012 8:53 am ] |
Post subject: | Re: Can't find an old post on QR pins |
The catalog has a chart of pins and where they can be used. |
Author: | gary eudy [ Fri Oct 26, 2012 12:40 pm ] |
Post subject: | Re: Can't find an old post on QR pins |
most Hobies really only need a few Quick Release pins Some connections are better served in my experience with SS nylock nuts and SS bolts where a QR is needed I use the ones with the cupped heads and a known quality name brand Former Hobie Admiral Gary |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |