Hobie Forums http://www.hobie.com/forums/ |
|
Hobie 16 tiller length http://www.hobie.com/forums/viewtopic.php?f=14&t=45832 |
Page 2 of 2 |
Author: | John Lunn [ Wed Nov 28, 2012 4:28 pm ] |
Post subject: | Re: Hobie 16 tiller length |
Carbon - A year ago, I got a deal on an FX-6, by the time I paid the dealer in the US, postage and customs etc, I was over $200....and I love it, especially when tacking and gybing, so light. Has a lot of 'feel' when out on the wings. Steve, I agree with Matt, you'll notice it on the H18... Like Matt's idea....I'll send the gang at the Club a link to this thread....thanks. |
Author: | optikid [ Thu Nov 29, 2012 5:15 pm ] |
Post subject: | Re: Hobie 16 tiller length |
MBounds wrote: optikid wrote: what is the thickness of the fiberglass stick 5/8" OD (0.625 inches)is that the telescoping or stock one? |
Author: | MBounds [ Thu Nov 29, 2012 6:51 pm ] |
Post subject: | Re: Hobie 16 tiller length |
optikid wrote: MBounds wrote: optikid wrote: what is the thickness of the fiberglass stick 5/8" OD (0.625 inches)is that the telescoping or stock one? |
Author: | sxrracer [ Thu Nov 29, 2012 7:21 pm ] |
Post subject: | Re: Hobie 16 tiller length |
optikid wrote: MBounds wrote: optikid wrote: what is the thickness of the fiberglass stick 5/8" OD (0.625 inches)is that the telescoping or stock one? Sent you a link for a matching jib. |
Author: | Rich McVeigh [ Fri Nov 30, 2012 5:18 am ] |
Post subject: | Re: Hobie 16 tiller length |
I have been using the Ronstan carbon battlestick for the last year. I have used it in all kinds of conditions and so far it's worked great. A number of the California H16 guys are using the Wildcat carbon tiller and report good results with that. Carbon tillers are definitely more fragile though and I have seen several breakages. Steve - It's noticeably lighter when tacking, you are welcome to give mine a test drive sometime. |
Author: | optikid [ Fri Nov 30, 2012 1:10 pm ] |
Post subject: | Re: Hobie 16 tiller length |
MBounds wrote: optikid wrote: MBounds wrote: optikid wrote: what is the thickness of the fiberglass stick 5/8" OD (0.625 inches)is that the telescoping or stock one? whats the thickness of a telescoping one? |
Author: | optikid [ Fri Nov 30, 2012 1:12 pm ] |
Post subject: | Re: Hobie 16 tiller length |
sxrracer wrote: optikid wrote: MBounds wrote: optikid wrote: what is the thickness of the fiberglass stick 5/8" OD (0.625 inches)is that the telescoping or stock one? Sent you a link for a matching jib. i got it, someone sent be a email of that jib then you sent a pm. i thought the email might have been you. I just bought a matching main about a month ago for 100$ thanks for the link though |
Author: | ASDASC [ Tue Dec 04, 2012 5:09 pm ] |
Post subject: | Re: Hobie 16 tiller length |
This seems like a good winter project. I had the old stock one (I think anyway, it did telescope, it came with the boat) and it was shattered, so I wrapped it in duck tape to protect myself from all the splinters and hope it worked for a while. That completely failed late last summer and I replaced it for the day with an old mop handle that works like crap. I am thankful that I saved the old one and can use the ends still on a homemade CF one. Any special epoxy, or will the Home Depot 5 minute stuff work? |
Author: | MBounds [ Tue Dec 04, 2012 8:06 pm ] |
Post subject: | Re: Hobie 16 tiller length |
I wouldn't use 5 minute stuff. It doesn't cure hard - more rubbery. It's also too viscous. Get one of the WEST System repair packs from West Marine. Realize that this makes a non-telescoping tiller . . . which is what comes stock on the boats. Optikid - I don't know what the diameter of the telescoping tiller is. I haven't used one in many years. Too many moving parts. |
Author: | optikid [ Wed Dec 05, 2012 4:17 pm ] |
Post subject: | Re: Hobie 16 tiller length |
ok thanks i feel the one i have is to thin. i have the stock white one. |
Page 2 of 2 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |