Hobie Forums http://www.hobie.com/forums/ |
|
This is all I need to replace the Seaway blocks on my H16? http://www.hobie.com/forums/viewtopic.php?f=14&t=46833 |
Page 1 of 1 |
Author: | Nevek [ Wed Mar 13, 2013 2:33 pm ] |
Post subject: | This is all I need to replace the Seaway blocks on my H16? |
http://www.ebay.com/itm/Sailboat-6-1-Ha ... 98&vxp=mtr My Seaways broke and this is all I am coming up with for a upgrade/replacement. Should work right? |
Author: | PurdueZach [ Wed Mar 13, 2013 3:43 pm ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
That'll do it. Assuming you have a decent mainsheet. I bought a used harken system like this and didn't notice much of a difference until I upgraded to a new 5/16" line. My original 1/8" mainsheet was too fuzzy to run through it well. |
Author: | sxrracer [ Wed Mar 13, 2013 7:25 pm ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
1/8 mainsheet????? |
Author: | PurdueZach [ Wed Mar 13, 2013 7:37 pm ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
I got my fractions confused. 3/8". |
Author: | PurdueZach [ Sat Mar 16, 2013 6:51 pm ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
These would work. http://spacecoast.craigslist.org/boa/3683136368.html |
Author: | BrianCT [ Sun Mar 17, 2013 6:43 am ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
Nevek wrote: http://www.ebay.com/itm/Sailboat-6-1-Harken-Mainsheet-Setup-Hobie-Prindle-Nacra-/150991574936?pt=Boat_Parts_Accessories_Gear&hash=item2327cc9798&vxp=mtr My Seaways broke and this is all I am coming up with for a upgrade/replacement. Should work right? Take a look at Nautos USA. You can buy a brand new 6:1 triple stack with 2000+ pound breaking strength for a song. I bought this setup for my Hobie 18 last spring and it works wonderfully (I've since upgraded mine to 7:1 by adding a Harken single stand-up block to the eye strap).... Part #92733 Triple Swivel w/becket - $116 Part #92230 Triple Boom block - $52 |
Author: | cezo823 [ Thu Apr 18, 2013 12:33 pm ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
I've been wondering about those Nautos blocks, so far so good huh? What kind of miles do you have on them? Many times? Heavy stuff? Just curious |
Author: | gary eudy [ Sat Apr 20, 2013 6:22 am ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
Harken equipment is the real standard in sailing I have never been one to cut corners in a surf boat |
Author: | BrianCT [ Sat Apr 20, 2013 7:54 am ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
cezo823 wrote: I've been wondering about those Nautos blocks, so far so good huh? What kind of miles do you have on them? Many times? Heavy stuff? Just curious There is very little difference between the Nautos blocks I purchased and the Harkens they replaced. They have the same listed breaking strength as Harken's equivalent and come with a five year warranty. I have no affiliation with Nautos but figured I would share my excellent experience with fellow cat sailors. I sail quite a bit and trust me, the typical sailor couldn't tell the difference. In my humble opinion, unless you're an elite "Tybee 500"/"Great Texas 300"-type, you'd be crazy not to consider them. I ordered my blocks on their website via PayPal and they arrived in my mailbox from Florida three or four days later. |
Author: | eaberg [ Sun Apr 21, 2013 11:13 am ] |
Post subject: | Re: This is all I need to replace the Seaway blocks on my H1 |
I also bought Nautos blocks last year, direct from the Nautos USA web site. I first spoke with the Nautos dealer in St.Pete. He was very helpful. They work just fine and appear to be very rugged and best of all... cheaper. I realize time will be the real test. These are the blocks I bought: 1) 92633 TRIPLE BLOCK SWIVEL BALL BEARING RATCHET BLOCK W/BECKET ALUMINUM SHEAVE http://www.nautos-usa.com/catalogo_02.p ... M%20SHEAVE 2) 92230, TRIPLE SWIVEL http://www.nautos-usa.com/catalogo_02.p ... E%20SWIVEL |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |