Hobie Forums http://www.hobie.com/forums/ |
|
Do Hobie 16 have different width made in different years? http://www.hobie.com/forums/viewtopic.php?f=14&t=49521 |
Page 1 of 1 |
Author: | djshad0w [ Tue Oct 08, 2013 7:07 am ] |
Post subject: | Do Hobie 16 have different width made in different years? |
Hi there, I have a 1982 Hobie 16 and a 197? H16 as well. It seems the frames are the same, but the 1970s one seems 1-2 inches narrower on the rollers of the trailer. Is this normal, or does that mean the previous owner did some repairs and didn't get everything square? Tried to search the forum but no luck |
Author: | AntonLargiader [ Tue Oct 08, 2013 3:59 pm ] |
Post subject: | Re: Do Hobie 16 have different width made in different years |
My '78 is narrower, too. The 2000 is, I think, at the current specification. No idea why the old one is different, but I have to adjust the trailer rollers for it. |
Author: | mmiller [ Wed Oct 09, 2013 7:51 am ] |
Post subject: | Re: Do Hobie 16 have different width made in different years |
No specification changes over the years. A tight dolphin striker (more forward beam bend) would pull the keels closer. |
Author: | GD_NC [ Wed Oct 09, 2013 5:56 pm ] |
Post subject: | Re: Do Hobie 16 have different width made in different years |
So that begs the question... what should it be? How can you tell if your striker is too tight/loose? Sent from my SPH-L710 using Tapatalk 4 |
Author: | mmiller [ Thu Oct 10, 2013 8:11 am ] |
Post subject: | Re: Do Hobie 16 have different width made in different years |
This recent topic has some width references: http://www.hobiecat.com/forums/viewtopic.php?f=14&t=49454 |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |