Hobie Forums http://www.hobie.com/forums/ |
|
Replacing the mast base http://www.hobie.com/forums/viewtopic.php?f=14&t=50845 |
Page 1 of 1 |
Author: | ASDASC [ Sun Mar 30, 2014 11:13 am ] |
Post subject: | Replacing the mast base |
While messing around in the garage I noticed that the mast base was loose and decided to take it apart. While I have it off I took a picture of it and the foam plug. It seems that often enough there are questions on here about it so I thought I would share it. I need to get some rivets, but this seems like an easy project. Sent from my LG-LS970 using Tapatalk |
Author: | ASDASC [ Sun Mar 30, 2014 8:19 pm ] |
Post subject: | Re: Replacing the mast base |
Well, I have a doner mast that had a tree fall on it about 3' from the top. I pulled the top off and found 2 mast plugs, plus some other black plastic thing. Sent from my LG-LS970 using Tapatalk |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |