Does anyone know the screw and nut size for the two screws/nuts that hold together the jib car to the jib plate to the bullseye fairlead in this jib system:
http://www.murrays.com/50-252322.htmlI tried some 10-24 1 1/4 inch stainless at the hardware store, but they were maybe 1/8 inch shorter than the old hardware; the nut was thicker; and the threads did not come through the nut. I can try the 1/ 1/2 inch, but would like to know if there is a definition, as they cannot be too long or they interfere with the integrated track.
Hobie: can you add a parts blow-up to your catalogue?
Thanks!
Ted
SC lake sailing
2007 Hobie 16