Hobie Forums http://www.hobie.com/forums/ |
|
Twist shackle for Aussie halyard http://www.hobie.com/forums/viewtopic.php?f=14&t=61177 |
Page 1 of 1 |
Author: | yelkenli [ Sat Jul 29, 2017 6:20 am ] |
Post subject: | Twist shackle for Aussie halyard |
Does anyone have a recommendation for a twist shackle for an aussie halyard. When hoisted, the blocks are skewed. I have been sailing it, so it is not a problem, but would rather have a shackle do the twisting. Not sure how big the shackle should be, strength, etc. Thanks! Ted |
Author: | yelkenli [ Sun Jul 30, 2017 8:15 am ] |
Post subject: | Re: Twist shackle for Aussie halyard |
This would be a replacement for part 11220000 SHACKLE STND "D" 4.7 MM from the Hobie catalogue, I see these twist shackles TWIST SHACKLE - THREADED PIN Part # Pin Dia. Width Length Max Ld# SP170005 3/16” 1/2” 7/8” 2640 SP170006 1/4” 9/16” 1 3/8” 4400 Interesting mix of metric and imperial measurements, and not sure which lines up the best. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |