banjo bolt and socket nut for Vantage seat

What is the part number and size for the socket nut which holds the banjo bolt that keeps tension on the rod that holds the upper mesh of the Vantage seat?

_________________
Duncan

Are you referring to the lumbar support system? Photo maybe?

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

I replaced the mesh back. The two full length spring rods that holds the mesh on each side are attached to the back frame with banjo bolts and barrel-sleeve nuts, one on each side. When I removed the nut it was stripped, overtightened from the original assembly probably, and now won't hold. On the back of the seat there are two phillips screws. These are not really screws but the nuts I'm speaking of.

_________________
Duncan

865090 BARREL SCREW

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

That's it, thanks.

_________________
Duncan

Matt, I'm having a hard time locating this part. I think no one stocks it because it is a non wear part. May I email you for some help?

_________________
Duncan

Any dealer can order this. They would not stock it.

_________________
Matt Miller
Former - Director of Parts and Accessory Sales
Warranty and Technical Support
Hobie Cat USA
(Retired 11/7/2022)

Thanks, I did find one.

_________________
Duncan