| Hobie Forums http://www.hobie.com/forums/ |
|
| Repairing Hull Sockets http://www.hobie.com/forums/viewtopic.php?f=15&t=247 |
Page 1 of 1 |
| Author: | cjfuller [ Thu Jul 03, 2003 6:18 pm ] |
| Post subject: | Repairing Hull Sockets |
My Hobie 17 has cracks in the hulll sockets that recieve the wing tubes. What's the best way to fix them? |
|
| Author: | MauganH17 [ Fri Jul 04, 2003 7:07 am ] |
| Post subject: | |
Do you have deck ports? If not, installing some near the holes will give you enough room to seal the tubes from the inside. |
|
| Author: | cjfuller [ Sat Jul 05, 2003 8:20 am ] |
| Post subject: | |
My boat doesn't have the inspection ports. What size ports should I install? |
|
| Author: | MauganH17 [ Sun Jul 06, 2003 7:50 pm ] |
| Post subject: | |
I have 5" ports in mine. You could probably get away with 6" ports, but you don't want to go any smaller or else you wont have enough space to work through. |
|
| Author: | cjfuller [ Mon Jul 07, 2003 3:08 am ] |
| Post subject: | |
Thanks, I'll see if I can get a pair. Only the stern sockets seem to be damaged. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|