Return to Hobie.com
Hobie Forums
It is currently Thu Mar 28, 2024 1:28 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: self tacking on h17
PostPosted: Wed Mar 02, 2011 4:56 am 
Offline
Site Rank - Deck Hand

Joined: Wed Mar 02, 2011 4:49 am
Posts: 11
hi, is possible to put a self tacking jib on a hobie 17?
i found a sailor who put it on a hobie 18:
viewtopic.php?f=13&t=10825&start=0


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Wed Mar 02, 2011 9:34 am 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5197
Location: Detroit, MI
Possible, but performance gains for the $$$$ would be minimal.


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Fri Mar 04, 2011 6:33 am 
Offline
Site Rank - Deck Hand

Joined: Wed Mar 02, 2011 4:49 am
Posts: 11
thanks,
i'm not intersted increasing my performance with jib.
i'd like to put a self tacking rail for a faster tack going solo.
reading forum opinions i think a square top main sail and a rolling reacher should increase performance of hobie 17.
isn't it?


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Fri Mar 04, 2011 9:29 am 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 5197
Location: Detroit, MI
Faster tacks? Not with a self tacking jib.

You'll tack faster by backwinding the jib which won't happen on a self-tacker.

Yes, the roller-furling jib will increase performance. Don't know about the square-head main - probably in lighter air, not so much for medium to heavy. Top of the mast is awfully bendy and can't really support it.


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Wed Mar 09, 2011 11:39 am 
Offline
Site Rank - Old Salt

Joined: Mon Sep 20, 2004 12:36 pm
Posts: 788
Location: Tri-Cities, WA
Unless you are running a spinnaker, I don't see much advantage in a self tacking jib. Tacks, even solo tacks, can go fast and smooth a little with practice. :wink:


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Wed Apr 13, 2011 4:11 am 
Offline
Site Rank - Deck Hand

Joined: Wed Mar 02, 2011 4:49 am
Posts: 11
thanks for your answers. i understand self tacking jib is not good for me.
i'd like to mount a furling hooter on my boat.
is possible to put this taveler in my jib track (it is integrated in the cross bar)?
Image
cheers from anzio bay in italy.


Top
 Profile  
 
 Post subject: Re: self tacking on h17
PostPosted: Wed Apr 13, 2011 12:52 pm 
Offline
Site Rank - Old Salt

Joined: Mon Sep 20, 2004 12:36 pm
Posts: 788
Location: Tri-Cities, WA
When my 2000 H17Sport flipped on the beach in a wind storm (bare wire), my mast snapped and the front crossbar was overstressed and cracked near each of the hulls (hurray for insurance). The new crossbar came with the integrated track so I bought the integrated track cars for the H16 (the one you have shown). I found that in order to be able to cleat while in the H17 track, I needed to add 15 degree wedges (made out of PVC flat stock and placed them between the car top and cleat bottom, held in place by the 2 bolts). I also changed the fixed horizontal angle to be more favorable for a soloer. To finish the project I fabricated adjustable inboard and outboard stops out of PVC flat stock. The inboard stops have a vertical hole drilled to attach the bungee for pulling the opposite sides car inboard and the outboard stop holds the outhaul pulley. Each of the 4 stops attaches to the integral track using 2 channel insert nuts (I originally used only one on the inboard stops, but the stops would slip over time). This system should work equally well for a hooter. http://www.thebeachcats.com/pictures/?g2_itemId=61752&g2_imageViewsIndex=1

PS The front cross bar may be too far forward for proper sheeting of a hooter. You may be better served by mounting the sheeting system similiar to a H18, the track is along the inside of the hull where the tramp attaches.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Jump to:  
© Hobie Cat Company. All rights reserved.
Powered by phpBB® Forum Software © phpBB Group