Hobie Forums http://www.hobie.com/forums/ |
|
jib blocks http://www.hobie.com/forums/viewtopic.php?f=17&t=19735 |
Page 1 of 1 |
Author: | TravDawg [ Sat Jan 16, 2010 4:48 pm ] |
Post subject: | jib blocks |
Wat sort of jib blocks do i use for the Turbo. (i have the wire underneath the tramp and the eyes in the tramp..) |
Author: | MBounds [ Sat Jan 16, 2010 5:58 pm ] |
Post subject: | Re: jib blocks |
The original blocks were made by Seaway and are no longer available except used. You want something like the Harken H2611: 40 mm sheave diameter, single ratchet w/becket and cam cleat. They're pricey - about $100 US each. Ronstan and Holt-Allen have similar styles, although they're just as expensive. |
Author: | TravDawg [ Sat Jan 16, 2010 6:37 pm ] |
Post subject: | Re: jib blocks |
wow!!! they are alot cheaper of here in aust ayy.. |
Author: | Banzilla [ Sat Jan 16, 2010 7:52 pm ] |
Post subject: | Re: jib blocks |
keep an eye on Ebay!!! |
Author: | TravDawg [ Sat Jan 16, 2010 8:35 pm ] |
Post subject: | Re: jib blocks |
yeah... there is never anything on ebay |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |