Hobie Cat Forums

It is currently Thu Jul 31, 2014 10:10 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Aug 30, 2010 6:16 am 
Offline
Site Rank - Captain

Joined: Wed Jan 06, 2010 6:35 am
Posts: 40
Location: Paris, France
Hello everyone,
I'm just back from vacation after 3 weeks at the beach house, spending some time with my H14T that I bought this winter and for which I bought many parts to make it "safe" and "almost" like new. All the advices, picture, experience from people of this forum where a great help for me as there is no local fleet here, all the hobie cat on the water belong to sailing schools or are used temporarly by vacation houses.

I bought this boat (H14 from 1973 converted to Turbo) for several reasons :
- hulls in good shape (checked by a gel coat professional working in a local boatyard)
- sails in good shape along with the rudders
- 5 miles drive to take it in the yard...
- good price

I did my list of parts to change according to the many usefull posts of this forums and bought locally or online (thanks to Jeremy of Surf City Catamaran) so I have new rigging, mast tang, monel rivets, rudder components... in fact every parts I thought was necessary to sail safely with my kids. We really had fun during these vacation and I just had to have locally built a new forestay since the old one was "old" and the local boatyard had everything to build the right one with the right equipment (they use a 23 Tons hydrolic press for the rigging joints)

Here is what happened during my sailing days :

- Second time out with windy afternoon with kitesurfs everywhere, during a jib, I hear a kind of "tAC" and the traveller really exploded with those small plastic pieced everywhere on the trampoline... I lost the direction control and was about to sink an anchored boat, luckily, by catching the boom and pulling the stick, I was able to change of direction and go toward the wind to stop and build a temporary fix with a piece of line (reattach the lower block).
I came back to the beach and reordered a new car plastic thing. I think, I'll get a new track and traveler for christmas...

- Once I dismantled everything for the winter, I had a big surprise and don't know if this is common : the sidebars have these stainless things on which the rigging is attached. Under the trampoline there is the cable where are attached the jib blocks. At the point of the sidebar where there are the rivets, I have a big crack and could expand it just by pushing it with my hands and knees. I'll buy new ones for next season and it's not too expensive so that's fine (already found a pair of almost new ones in black for 150 euro)

Question :

- Any suggestion (reference) for the traveler and track to replace the old original one (1973) ?

- is that common ? (for a 1973 boat, I'm ok with a such damage since it seems due to the location, I imagine there is a lot of stress on this area). I'm glad that the crack didn't open and the sidebar didn't break in two parts while I was crossing the harbor with my son or daughter, I don't even imagine what would have happen with the mast falling down, the trampoline in the water and some power boat not very far...

- is it possible that I'm the one who made these cracks ? the cracked aluminium had this white color that looks like it was cracked for a while in salt water. maybe I didn't tension enough the trampoline ? (I tensionned it again after a few days and it seemed tight)

As an advice to anyone buying an oldboat, check everything, I was afraid of some issues in the hulls, mast or other and it's the sidebars who break...

Nicolas


Top
 Profile  
 
PostPosted: Mon Aug 30, 2010 2:59 pm 
Offline
Site Rank - Old Salt

Joined: Mon Sep 20, 2004 12:36 pm
Posts: 758
Location: Tri-Cities, WA
The H14 puts a lot of stress on the side rails due to the shroud connetions. Add to that the pull from jib blocks of the H14 Turbo and no wonder you have cracks. I would chalk it up to wear and tear. Same with the traveler car. It likely had a few wheels missing or damaged prior to the blowout, so what was left couldn't handle the strain. If the underside of the track (where the travler wheels roll) is smooth. Then you should only need the plastic car & wheels (the rest of the car is SS). With a boat that old you should also give a close look at all your standing rigging. I've owned a H16 and currently a H17Sport, I sail hard about 35-45 days a year and replace my standing rigging about every 5 years. 8)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group