Hobie Forums
http://www.hobie.com/forums/

hobie turbo
http://www.hobie.com/forums/viewtopic.php?f=17&t=33567
Page 1 of 1

Author:  optikid [ Mon Jan 03, 2011 6:32 pm ]
Post subject:  hobie turbo

hi im thinking about getting Hobie 14 and wanted to know how much the hobie turbo kit would be and i wanted to know where you would get one online.


optikid



http://opti-sailor.yolasite.com

Author:  MBounds [ Tue Jan 04, 2011 8:43 am ]
Post subject:  Re: hobie turbo

It depends on where you are and how much you want to spend.

New, they are available from any Hobie Dealer, some of whom have on-line ordering.

Author:  optikid [ Tue Jan 04, 2011 5:03 pm ]
Post subject:  Re: hobie turbo

im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place?

optikid


http://opti-sailor.yolasite.com

Author:  splashTX [ Tue Jan 04, 2011 6:06 pm ]
Post subject:  Re: hobie turbo

optikid wrote:
im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place?

optikid


http://opti-sailor.yolasite.com


Sold my turbo stuff

Author:  optikid [ Fri Jan 07, 2011 7:05 pm ]
Post subject:  Re: hobie turbo

i found out it is a turbo but do you have a mast float?

Author:  Ploux79 [ Fri Feb 04, 2011 5:24 pm ]
Post subject:  Re: hobie turbo

optikid wrote:
im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place?

optikid


http://opti-sailor.yolasite.com


Murray's has been really good for me, Over the winter I have replaced most parts on my 14 and they were very helpful and knowlegable. Super fast shipping too, I also live in Florida

Author:  fastcat [ Mon Feb 21, 2011 1:52 pm ]
Post subject:  Re: hobie turbo

Ditto on Murray's, they have most stuff in stock, prices are at market rates and shippes same or next day. :wink:

Author:  RobPatt [ Tue Feb 22, 2011 1:28 pm ]
Post subject:  Re: hobie turbo

check the beach cats dot com website for used parts.. there's a guy called presailed parts...

you'll need bridles, furler, jib, holes in your tramp for the jib cleats, and the longer shroud tangs to go to the jib block wire running under the tramp from one tang to the other side... and dolphin striker setup

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/