Hobie Forums http://www.hobie.com/forums/ |
|
hobie turbo http://www.hobie.com/forums/viewtopic.php?f=17&t=33567 |
Page 1 of 1 |
Author: | optikid [ Mon Jan 03, 2011 6:32 pm ] |
Post subject: | hobie turbo |
hi im thinking about getting Hobie 14 and wanted to know how much the hobie turbo kit would be and i wanted to know where you would get one online. optikid http://opti-sailor.yolasite.com |
Author: | MBounds [ Tue Jan 04, 2011 8:43 am ] |
Post subject: | Re: hobie turbo |
It depends on where you are and how much you want to spend. New, they are available from any Hobie Dealer, some of whom have on-line ordering. |
Author: | optikid [ Tue Jan 04, 2011 5:03 pm ] |
Post subject: | Re: hobie turbo |
im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place? optikid http://opti-sailor.yolasite.com |
Author: | splashTX [ Tue Jan 04, 2011 6:06 pm ] |
Post subject: | Re: hobie turbo |
optikid wrote: im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place? optikid http://opti-sailor.yolasite.com Sold my turbo stuff |
Author: | optikid [ Fri Jan 07, 2011 7:05 pm ] |
Post subject: | Re: hobie turbo |
i found out it is a turbo but do you have a mast float? |
Author: | Ploux79 [ Fri Feb 04, 2011 5:24 pm ] |
Post subject: | Re: hobie turbo |
optikid wrote: im in Sarasota fl but i DON'T want to get it from tackle shack because they are to expensive. wheres the cheapest place? optikid http://opti-sailor.yolasite.com Murray's has been really good for me, Over the winter I have replaced most parts on my 14 and they were very helpful and knowlegable. Super fast shipping too, I also live in Florida |
Author: | fastcat [ Mon Feb 21, 2011 1:52 pm ] |
Post subject: | Re: hobie turbo |
Ditto on Murray's, they have most stuff in stock, prices are at market rates and shippes same or next day. |
Author: | RobPatt [ Tue Feb 22, 2011 1:28 pm ] |
Post subject: | Re: hobie turbo |
check the beach cats dot com website for used parts.. there's a guy called presailed parts... you'll need bridles, furler, jib, holes in your tramp for the jib cleats, and the longer shroud tangs to go to the jib block wire running under the tramp from one tang to the other side... and dolphin striker setup |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |