I was going through the exact same thing with my 84 H-14T, i am 215lbs.
What i did is i went to Walmart and got a Tie-Down Replacement Strap for a trailer's winch (<$10).
http://www.northerntool.com/webapp/wcs/ ... 5514_55514
THen i used 6 alum revits and 12 washers (on each strap) and revited the straps to the trampoline having the washers on both sides of the tramp.
I also put a little 1 inch square of the strap on the inside of the washers so the washers wouldnt hold on directly to the tramp.
It works great! Just make sure that the Revits hardly fit in the washers so when the revit pop it would actually hold on to the washers.
Let me know if you have any questions.
xx x x xx
xx x x xx
^ TOP OF THE BOAT
-----------REVIT
-----------WASHER
-----------EXTRA 1 INCH sq STRAP
=========== TRAMPLOINE
-----------EXTRA 1 INCH sq STRAP
-----------WASHER
-----------REVIT
Good Luck!
-Ash