Hobie Forums http://www.hobie.com/forums/ |
|
Early 70's Hobie 14 Rigging http://www.hobie.com/forums/viewtopic.php?f=17&t=44208 |
Page 1 of 1 |
Author: | duxdad [ Tue Jul 31, 2012 5:12 pm ] |
Post subject: | Early 70's Hobie 14 Rigging |
I am restoring my Hobie 14 purchased in the early 70's(as I remember ). Sail number 4156, will have to see if I can find a serial. A Looong time ago I was told the rigging in this generation was shorter the newer vintages. Does anyone have the measurements for these early models? Also need a tiller and tramp. I have seen tramps on Ebay. Anyone have an opinion of these? Thanks all |
Author: | blord5 [ Wed Aug 01, 2012 9:29 am ] |
Post subject: | Re: Early 70's Hobie 14 Rigging |
Hey Duxdad, I'm in the same situation as you, although I purchased a new forestay already and had to have it cut down once. Probably will get is shortened again as I still don't have room for the forestay adjuster, and the mast rake is too severe - causes binding between the mast and step. "hobiesrock" posted on Jun 18 this year that his original wires measured: forestay - 12' 3 1/2" bridles - 5' 1/4" shrouds - 15' 5" Can someone corroborate these numbers? |
Author: | hobiesrock [ Wed Aug 01, 2012 10:15 am ] |
Post subject: | Re: Early 70's Hobie 14 Rigging |
Salty Dog swapped me out shrouds and forestay to the older measurements. It all worked out good in the end. I cant find the notes I took with all the measurements...but those #'s you posted are very close to what Salty sent me I believe. I used the "new" bridle wires Which I believe were a fuzz longer than what was on my boat. They took good care of me, and I would suggest calling them up and talking it over with them! I have since sold the boat and got a 16 so I cant be of much more help. Ill keep an eye out for my notes though! |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |