Hobie Cat Forums

It is currently Tue Sep 16, 2014 5:15 am

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Hobie 14 repair ?
PostPosted: Sun Aug 12, 2012 2:20 pm 
Offline
Site Rank - Deck Hand

Joined: Thu Aug 02, 2012 1:47 pm
Posts: 2
http://www.4shared.com/photo/Wnlhmfd6/Hobie_14_007.html
http://www.4shared.com/photo/BvET-PSg/Hobie_14_006.html
http://www.4shared.com/photo/5yo--1Gg/Hobie_14_005.html
http://www.4shared.com/photo/lOIFcpPx/Hobie_14_004.html
http://www.4shared.com/photo/Mm3nlW0P/Hobie_14_003.html
http://www.4shared.com/photo/-4mcL1ra/Hobie_14_002.html
http://www.4shared.com/photo/jHnVVf9c/Hobie_14_001.html


Just pulled in the yard and parked this (new to me)old Hobie 14. Where should I get new drain plugs from? Rudder pins are plastic and one is broken off. Should put in Aluminum ones? Got one soft spot forward port hull and one fracture aft port hull? Any suggestions for repair?

Thank you,

Tony :?:


Top
 Profile  
 
 Post subject: Re: Hobie 14 repair ?
PostPosted: Mon Aug 13, 2012 1:31 pm 
Offline
Site Rank - Captain

Joined: Sun Mar 21, 2010 1:44 pm
Posts: 61
Location: W. Chesterfield, NH & Hope, ME
Another 14 about to come back from the dead! When you're done fixing her up, you'll love it.

Here's a link to the Hobie website where you can request a catalog and find a dealer (if one is located where you are). I resurrected a much worse boat over the past couple of years - but no soft spots. Used fiber glass rudder pins - for my sailing needs they're holding up well. I don't know of any resource that gives the most-to-least strengths of the 4 types of pins you can buy - anyone?

http://www.hobiecat.com/sailing/

Lots of information about soft spot repair on this forum - use the search feature and read up on it. Doesn't seem too hard to do. Does the other puncture penetrate into the inside of the hull?

_________________
Bruce


Top
 Profile  
 
 Post subject: Re: Hobie 14 repair ?
PostPosted: Wed Aug 15, 2012 7:54 pm 
Offline
Site Rank - Admiral

Joined: Mon Jan 03, 2011 3:42 pm
Posts: 261
Location: Sarasota Sailing Squadron
the ss ones are the strongest alum. in 2ed and fiber glass in last because they are designed to snap if they get hit hard.

_________________
http://youtube.com/optikid16030
Image
1983 Hobie 16 Cat fever #55697
2008 Laser Radial/4.7 #190471
S.S.S.
S.Y.S.P


Top
 Profile  
 
 Post subject: Re: Hobie 14 repair ?
PostPosted: Tue Aug 21, 2012 10:22 pm 
Offline
Site Rank - Old Salt

Joined: Thu Apr 24, 2008 3:58 am
Posts: 576
Location: Knoxville, TN
My favorite source of parts is Mariner Sails, the Dallas Hobie dealer. If you don't live near Dallas, don't worry, they'll ship parts anywhere. They have a big parts inventory and a knowlegable staff. Their site has online part diagrams that are fantastic. You can see every part for your Hobie, get part numbers, and see how much they cost. Visit them at: http://www.mariner-sails.com/. Click on the "Hobie Cat" tab on the menu on the left side of the home page and navigate from there. Typically, if they have your part in stock, and they usually do, they'll ship the same day via UPS if you order before noon. Free shipping for military.

_________________
Mark Van Doren
Division 9 Chairman
H16 #112205 (Richard Petty Signature Edition)
H14T #47787
H20 #647 (sold)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group