Hobie Cat Forums
It is currently Wed Jun 19, 2013 10:26 am

View unanswered posts | View active topics


Board index » Hobie Cat Sailing » Hobie 14/14 Turbo

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
duxdad
PostPosted: Fri Aug 31, 2012 12:06 pm 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 31, 2012 5:03 pm
Posts: 15
Got my restored H14 in the water and running well except it steers like a truck. I notice when I try to come about one rudder is about 10 - 15 degrees further around and is acting like a brake.
When rudders are down should they be paralleled to the pontoons? Toed in/out? My tiller crossbar is 76" to the bolt center.
Thanks

https://www.dropbox.com/s/hfwfuwo0dhx2gdn/2012-08-31%2015.52.34.jpg


Last edited by duxdad on Sat Sep 01, 2012 5:33 am, edited 4 times in total.

Top
 Profile  
 
MBounds
PostPosted: Fri Aug 31, 2012 12:54 pm 
Offline
Hobie Approved Guru

Joined: Mon Jul 14, 2003 7:11 pm
Posts: 4306
Location: Detroit, MI
With both rudders down, the trailing edges should be about 1/8" to 1/4" further apart than the leading edges.
Top
 Profile  
 
duxdad
PostPosted: Fri Aug 31, 2012 1:17 pm 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 31, 2012 5:03 pm
Posts: 15
That is what I thought, Mine are about 9 inchs difference between edge of rudder front to back. My tiller crossbar is 77" tip to tip. Tube about 74 1/2. The slight bend in the tiller casting is headed to the centerline of the boat.
67 rear, 76 front measured on the rudder blade by the cutout.
I must have something wrong but don't understand what. The casting reversed?
Ideas? I have a pic but haven't figured out how to add to post.
Thanks
Top
 Profile  
 
hobiesrock
PostPosted: Fri Aug 31, 2012 1:29 pm 
Offline
Site Rank - Old Salt

Joined: Sat Oct 29, 2011 4:27 pm
Posts: 350
Location: Central Oregon
Just a wild a#$ guess here...maybe you have a 16 cross bar on a 14?

_________________
1980 H16
1997 Wave
Top
 Profile  
 
optikid
PostPosted: Fri Aug 31, 2012 6:49 pm 
Offline
Site Rank - Admiral

Joined: Mon Jan 03, 2011 3:42 pm
Posts: 220
Location: Sarasota Sailing Squadron
the top castings should be facing towards the middle of the boat so you could have them on the wrong hull. also if you send me the pics i can post them.

_________________
http://youtube.com/optikid16030
Image
1983 Hobie 16 Cat fever #55697
2008 Laser Radial/4.7 #190471
S.S.S.
S.Y.S.P
Top
 Profile  
 
duxdad
PostPosted: Sat Sep 01, 2012 10:35 am 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 31, 2012 5:03 pm
Posts: 15
Well I will answer my own question, sheepishly!
I had the hulls reversed. There is no striping or decoration on the outside and I failed to notice the non skid surface was on the inside. Stupid stupid! But it has been twenty something years since I last assembled/sailed the boat :)
Well this AM put them back correctly and my rudders align correctly.
Thanks
Top
 Profile  
 
hobiesrock
PostPosted: Sat Sep 01, 2012 10:42 am 
Offline
Site Rank - Old Salt

Joined: Sat Oct 29, 2011 4:27 pm
Posts: 350
Location: Central Oregon
:lol: That will make it sail a lil better!

_________________
1980 H16
1997 Wave
Top
 Profile  
 
duxdad
PostPosted: Sat Sep 01, 2012 10:51 am 
Offline
Site Rank - Deck Hand

Joined: Tue Jul 31, 2012 5:03 pm
Posts: 15
It was a weather helm on steroids !! :mrgreen:
Top
 Profile  
 
optikid
PostPosted: Sat Sep 01, 2012 6:14 pm 
Offline
Site Rank - Admiral

Joined: Mon Jan 03, 2011 3:42 pm
Posts: 220
Location: Sarasota Sailing Squadron
lol.. how was your pointing?

Image

_________________
http://youtube.com/optikid16030
Image
1983 Hobie 16 Cat fever #55697
2008 Laser Radial/4.7 #190471
S.S.S.
S.Y.S.P
Top
 Profile  
 
MVD
PostPosted: Wed Sep 05, 2012 9:26 pm 
Offline
Site Rank - Old Salt

Joined: Thu Apr 24, 2008 3:58 am
Posts: 481
Location: Knoxville, TN
Ages ago, we had a fleet meeting at a dealer's facility and several of us noticed that he had assembeled a 14 with the hulls on the wrong side. Needless to say, he caught a bunch of grief. Trying to sail it to weather in a breeze would be a trip. A bad trip.

_________________
Mark Van Doren
Division 9 Chairman
H20 #647
H14 #47787
H16 #112205
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Hobie Cat Sailing » Hobie 14/14 Turbo

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group