| Hobie Forums http://www.hobie.com/forums/ |
|
| Getaway Standing Rigging http://www.hobie.com/forums/viewtopic.php?f=20&t=24078 |
Page 1 of 1 |
| Author: | seaflyer [ Sun May 02, 2010 2:38 pm ] |
| Post subject: | Getaway Standing Rigging |
I was wondering if anyone out there would be kind enough to send me a couple of pics of their mast tang with all of the rigging installed I have new shrouds and trap wires to deal with and I want to make sure that I have it right. I have already pinned the shrouds to the hulls. Also, any insight on what to do with the safety wiring would be appreciated. I am not the most mechanically inclined person and these wires are vital! Thanks again everyone for your help! Your feedback is appreciated. |
|
| Author: | mmiller [ Mon May 03, 2010 2:50 pm ] |
| Post subject: | Re: Getaway Standing Rigging |
You can view the manual and the rigging video for this. Check the FAQ right here in the Getaway forum for links: http://www.hobiecat.com/community/viewtopic.php?f=23&t=12777 Funny... The still frame of the video shows this connection! The safety wire passed through the pin and around the shackle to keep the pin from turning. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|