Hobie Forums
http://www.hobie.com/forums/

Help please and a dumb question
http://www.hobie.com/forums/viewtopic.php?f=20&t=3420
Page 1 of 1

Author:  rcvusa [ Fri Apr 21, 2006 10:48 am ]
Post subject:  Help please and a dumb question

I have an '88 H16, fantastic boat. Since the last couple of hard sails I have noticed the outside of the stbd hull has started to delam. From about 2' aft of the bow for 3 - 4' and about 12" to 18" deep. This is the only soft spot, the decks are good and hard. I have seen Matt's FAQ re deck repair and I guess I can apply same principal tho' I've never worked with GRP. How serious is this? Can I make the repair with the hull vertical or do I need to lay the boat on the side? If vertical I guess I just need a row of holes at the top of the delam and fill it until the resin appears out the holes?
Now the dumb question. Are comptip mast a safety feature or about reducing the weight up top? Thanks so much for any input.

Author:  mmiller [ Fri Apr 21, 2006 12:23 pm ]
Post subject:  Questions

The delam should be fixed. YOu may be able to do it mounted on the hull, but it would work better if the surface was more horizontal.

CompTips are a safety issue only: http://www.hobiecat.com/community/viewtopic.php?t=78

Author:  Omallycat [ Sat Apr 22, 2006 3:07 am ]
Post subject:  Comptips

Glad someone else asked that cos I was wondering too!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/