| Hobie Forums http://www.hobie.com/forums/ |
|
| Comptip refinishing question http://www.hobie.com/forums/viewtopic.php?f=20&t=38093 |
Page 1 of 1 |
| Author: | RobDek [ Mon Aug 29, 2011 11:03 am ] |
| Post subject: | Comptip refinishing question |
The comptip of '07 Getaway is showing a fair amount of wear & tear, the skin coat is chipping in many places. I plan to strip away all the loose & damaged material and then refinish with thickened epoxy (West System). On top of the epoxy, I would like to use some type of rubberized rocker panel/underbody paint or perhaps bedliner spray. Any recommendations? |
|
| Author: | srm [ Mon Aug 29, 2011 12:30 pm ] |
| Post subject: | Re: Comptip refinishing question |
Flat black grill paint. I shot the comptip on my 1990 18 with a couple coats of it two years ago and it still looks good even after spending two summers in the sun. sm |
|
| Author: | Bacho [ Tue Aug 30, 2011 6:33 am ] |
| Post subject: | Re: Comptip refinishing question |
I used epoxy appliance paint for the comp-tip and rudders. So far so good. |
|
| Author: | mmiller [ Tue Aug 30, 2011 8:36 am ] |
| Post subject: | Re: Comptip refinishing question |
I've always been told that Vinyl spray paint is best, since it flexes. It also covers loose fibers. Sounds like there are many good options. |
|
| Author: | MVD [ Wed Aug 31, 2011 4:03 am ] |
| Post subject: | Re: Comptip refinishing question |
I've used Krylon gloss black, seems to stay on pretty well, looks good after two years. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|