Hobie Forums http://www.hobie.com/forums/ |
|
Hobie 16 hull cut away view or diagram?? http://www.hobie.com/forums/viewtopic.php?f=20&t=4301 |
Page 1 of 1 |
Author: | ALEXSAILS [ Sun Jul 23, 2006 8:31 pm ] |
Post subject: | Hobie 16 hull cut away view or diagram?? |
Hi, Anyone has a lenght wise cut away view or diagram of a H16 hull?? I need to know how deep into the hull are the pylons installed at factory and what is supporting them at the keel inside the hull. One of my decks depressed/flexed down around the base of the pylon! Before I cut and access hole on the side of the hull I need to know this. thanks! |
Author: | MBounds [ Mon Jul 24, 2006 7:12 am ] |
Post subject: | |
These are on the site http://www.thebeachcats.com under "Pictures", "Technical", "Inside the Hobie 16" |
Author: | arcsurf [ Fri Sep 16, 2011 7:53 pm ] |
Post subject: | Re: Hobie 16 hull cut away view or diagram?? |
This compression point seems to be the source of continuous hull cracking. How about an injection of a high density closed cell foam around this point to distribute the loads more evenly? Access is the problem too. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |