| Hobie Forums http://www.hobie.com/forums/ |
|
| Delamination Fix http://www.hobie.com/forums/viewtopic.php?f=20&t=4482 |
Page 1 of 1 |
| Author: | mitchl [ Tue Aug 08, 2006 12:14 pm ] |
| Post subject: | Delamination Fix |
I've been looking at some replies on repairing delamination and they suggest using a product called "Git Rot." I have not been able to located a supplier for "Git Rot" where I live (Nova Scotia, Canada). Could I use a Epoxy resin and achieve the same results? Mitch |
|
| Author: | ALEXSAILS [ Thu Aug 10, 2006 7:05 pm ] |
| Post subject: | |
I would use GROT in an open cavity where it can be poured into the delamination or rotted area. A thin sandwich delam like in Hobies can be better fixed by drilling holes thru the first layer, Then carving out some foam with a bent nail and vac to open the area inside,,, then injecting epoxy.... Any other opinions? |
|
| Author: | Hobie Nick [ Tue Aug 15, 2006 9:47 am ] |
| Post subject: | |
Try these guys... http://www.jamestowndistributers.com They have everything |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|