Hobie Forums http://www.hobie.com/forums/ |
|
traveler rivet holes on crossbar enlarged - what to do? http://www.hobie.com/forums/viewtopic.php?f=20&t=5112 |
Page 1 of 1 |
Author: | David Devon [ Mon Oct 09, 2006 2:43 pm ] |
Post subject: | traveler rivet holes on crossbar enlarged - what to do? |
Several jib traveler rivet holes on my H16 are enlarged from multiple replacements and I'm not sure how to fix them. I've tried a sleeve for my 3/16" rivet but it keeps pulling through the crossbar hole. Can I go to a larger rivet (i.e. 1/4" or 5/16")? Any other solutions? Thanks[/list] |
Author: | hobie1616 [ Mon Oct 09, 2006 5:24 pm ] |
Post subject: | |
Larger rivets are the first choice. The only other choice is to drill new holes. |
Author: | mmiller [ Tue Oct 10, 2006 8:30 am ] |
Post subject: | Holes |
Move the track an inch inboard and re-mount. |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |