Practice.
I've gotten better at flying a hull from just working on one variable at a time. Usually I'll work on it on day that's not to windy. I'll sit on the tamp on the low side or the hull.
Trying to turn with a gust and letting the main out is a lot to do so pick one!
Try setting a course and holding it and only use the main sail to adjust your speed and tip. Don't lock the main sail in. Most times just letting the line go, letting the sail out on its own save me from going over even with a gust. (Doing that on a windy day can cause your boat to drop fast scare your crew, sometimes sending them into the water.) If you are working with the main it might be easier to have a crew member watch where you are going while you watch the block and get a feel for how much line you need to slow your tip reach a stable angle.
Or you can start with you main locked in, heading as close to the wind as you can and slowly ease off until you find that angle that will lift your boat. Turning back into the wind will drop your hull.
I find that controlling a boat from the low side gives me a better perspective on how far I can tip and recover. Plus, it requires less wind.
If you have a crew, tell them stay still and avoid leaning in and out as the boat tips. This just adds to the complexity.
Good Luck!
P.S.
If you or someone on the low side slips into the water causing drag while really flying a hull, it will be back to righting 101.
|