Hobie Forums http://www.hobie.com/forums/ |
|
possible to lace the trampoline too tight? http://www.hobie.com/forums/viewtopic.php?f=24&t=40618 |
Page 1 of 1 |
Author: | Wingnutt [ Fri Dec 16, 2011 8:05 pm ] |
Post subject: | possible to lace the trampoline too tight? |
For the second time now since Ive had the boat (a few weeks) the trampoline is starting to sag near the rear. The last time I tightened it I gained about 6" of rope. I have a tool that is basically vice grips with rubber jaws.. Im thinking of pulling the rope as tight as I can at each eye, clamping it, then pulling it as tight as I can at the next eye, moving the clamp to that eye, and so on all the way down. I know I can make it MUCH MUCH tighter this way, my concern is, can I tighten it too much? |
Author: | IndyWave [ Sat Dec 17, 2011 6:55 am ] |
Post subject: | Re: possible to lace the trampoline too tight? |
I think you've just described the "standard procedure" for tightening the tramp. Some people use tapered dowels jammed through the eyelets rather than clamps, but I think your rubberized vise grips would be great for the task. Another trick I had read about for other cats, which I just used on mine: put it on the trailer and use straps around the whole boat to pull the hulls together, then tighten the laces. Now I can easily bounce a quarter on the tramp! |
Author: | mmiller [ Sat Dec 17, 2011 10:44 am ] |
Post subject: | Re: possible to lace the trampoline too tight? |
Too tight? You can distort the hull or tear grommets. Be careful when loading up each grommet. |
Author: | Wingnutt [ Sun Dec 18, 2011 6:08 pm ] |
Post subject: | Re: possible to lace the trampoline too tight? |
I wonder why nobody (3rd party or Hobie) Makes a SOLID "tramp" I.E. a solid deck made of fiberglass or something to that effect that can be fitted to the wave. For folks who have not intention of regularly taking apart the boat. |
Author: | mmiller [ Mon Dec 19, 2011 9:27 am ] |
Post subject: | Re: possible to lace the trampoline too tight? |
Would be heavy and hard on the knees I'd think! |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |