Hobie Forums http://www.hobie.com/forums/ |
|
Wave Cross Bar End Caps - Backrest http://www.hobie.com/forums/viewtopic.php?f=24&t=45193 |
Page 1 of 1 |
Author: | BobV5 [ Sun Sep 30, 2012 2:52 pm ] |
Post subject: | Wave Cross Bar End Caps - Backrest |
Question for those with the backrest for the Wave... When sailing with the backrest removed, do you do anything to cover the opening where the end caps were? Do you keep the quick pins in to help keep the boat tight (Classic Tramp) ? |
Author: | cooldudecaptain [ Sun Sep 30, 2012 4:05 pm ] |
Post subject: | Re: Wave Cross Bar End Caps - Backrest |
I made pins out of 1/4" dia aluminum bar stock, drilled holes for keeper pins, and added small dia. shock cord for mounting. The pins remain with the back rests. see photo/Users/williamaxon/Desktop/IMG_6017.jpeg |
Author: | BobV5 [ Sun Sep 30, 2012 5:06 pm ] |
Post subject: | Re: Wave Cross Bar End Caps - Backrest |
Sounds interesting. Not sure where your picture info is pointing to. Would like to see a pic of your setup. |
Author: | cooldudecaptain [ Mon Oct 01, 2012 7:20 pm ] |
Post subject: | Re: Wave Cross Bar End Caps - Backrest |
plez see marked up photo. /Users/williamaxon/Desktop/IMG_6017.jpeg bill |
Author: | Norm742 [ Mon Oct 01, 2012 8:43 pm ] |
Post subject: | Re: Wave Cross Bar End Caps - Backrest |
It looks like the image is sitting on cooldudecaptain's PC. It has to be on a site hosted on the internet. Instructions are here http://www.hobiecat.com/forums/viewtopic.php?f=18&t=8574 (I'm interested in seeing the end cap solution as well) |
Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |