I just noticed that the end of my mast tang is pretty flush against the comptip on one side, but sticks out about 1/8" on the other.
I don't know if it just happened or was always this way (purchased the boat new early summer). I tried to get some pics and they should be visible here:
https://onedrive.live.com/redir?resid=E ... t=album%2cThe gap seems to just be just at the last rivet. It doesn't seem that the rivet is loose though obviously I don't want to pry too much on it to check!
Is this bad and, if so, how bad?
(Boat is garage stored and only used a few times. No capsizes or anything untoward.)